
Terra Mater
ResiPlank Vinyl Ardore 507
A glue-down luxury vinyl tile built from 100% virgin PVC, the ResiPlank Vinyl Ardore 507 combines a 0.7mm wear layer and AC5 abrasion rating with a Lifetime Structural Warranty and 30 Year Residential Wear Warranty across a palette of ten timber-inspired colourways. Rated 100% waterproof by Terra Mater, it is suitable for wet areas including bathrooms, saunas and laundries.
Discover Terra Mater - ResiPlank Vinyl Ardore 507 - Vinyl Flooring For Your Melbourne Domain
Discover the stunning ResiPlank Vinyl Ardore 507 colour palette, and be sure to visit the Domain Flooring Carnegie showroom to see these beautiful tones in real light, where they truly come to life.

Ibis White (309-13)

Mink (309-19)

Ash Blonde (309-23)

Valencia (309-24)

Savannah (309-14)

Highland Blackbutt (309-22)

Highland Spotted Gum (309-21)

Ceylonese (309-16)

Gunsynd (309-18)

Shadow Grey (309-20)
Terra Mater - ResiPlank Vinyl Ardore 507 - Vinyl
The Terra Mater ResiPlank Vinyl Ardore 507 is a timber-look luxury vinyl tile with a confident mix of warm and cool tones across ten named colourways, from the pale softness of Ibis White and Ash Blonde to the richer depths of Gunsynd, Ceylonese and Shadow Grey. It is a product built for hardworking Australian homes and commercial spaces, carrying an ISO 10874 / EN 685 classification of Commercial heavy and Domestic very heavy. At Domain Flooring in Carnegie, we stock samples from the Ardore 507 range so you can assess the colour and texture of each colourway in natural and artificial light before committing.
Constructed from 100% virgin PVC and measuring 1505mm x 235mm x 5.0mm, the Ardore 507 uses a 0.7mm PU-coated wear layer and achieves an AC5 abrasion rating. The backing is a PVC friction pad. The product is a direct stick installation, with Terra Mater specifying Uzin KE 2000 S adhesive for full-coverage application. There is no attached underlay, and no click or floating system is used. The plank-format tile format suits a wide range of room layouts, and with staggered jointing of at least 200mm required during installation, the finished floor presents as a well-proportioned timber analogue.
Terra Mater rates the Ardore 507 as 100% Waterproof and explicitly states that it can be installed in bathrooms, saunas, laundries and other areas with high levels of steam or moisture, though local, state and federal waterproofing standards may require additional procedures. The slip resistance result is SRV 32 / P3 (wet pendulum) and R10 (wet ramp) under AS/NZS 4586.2020 and AS/NZS 4586.2013 App D. Acoustic impact noise reduction testing returns FIIC5,6 = 58 and L'nTw3 = 47 with an AAAC 4 Star Rating. The product is suitable for in-slab hydronic underfloor heating with a maximum slab surface temperature of 26 degrees Celsius; no other form of underfloor heating is recommended. Staining resistance testing shows no visible change (AS/NZS 2924.2), Class 5 (EN 438) and a Pass result (ASTM F925). On the environmental side, Terra Mater describes the Ardore 507 as 100% recyclable, low in VOCs and phthalate-free, with compliance confirmed under ASTM D5116 and the Green Building Council of Australia.
The Ardore 507 is backed by a Lifetime Structural Warranty, a 30 Year Residential Wear Warranty and a 10 Year Commercial Wear Warranty. Warranties are conditional on installation by a qualified and experienced contractor following Terra Mater's current installation instructions, and on regular maintenance using only approved pH neutral cleaning products. Steam mops are strictly prohibited and will void the warranty. Terra Mater extends its structural and wear warranties to flooring installed over in-slab hydronic heating, provided the installation instructions are followed in full. For concrete subfloors, moisture content must be below 75% Relative Humidity before installation proceeds; a damp-proof membrane is required where this threshold is exceeded.

Additional Details
Specifications
| Price indication | $$ |
| Flooring type | LVT — Luxury Vinyl Tile |
| Substrate / core layer | PVC Virgin Vinyl |
| Wear layer | 0.7mm |
| Profile | No bevelled edge |
| Total product thickness | 5.0mm |
| Dimensions | 1505mm x 235mm x 5.0mm |
| m² per box | 2.12m² |
| Installation method | Glue-down (direct stick using hard set adhesive with full coverage) |
| Underfloor heating suitability | Suitable for in-slab hydronic underfloor heating; maximum slab surface temperature 26°C |
| Slip rating | Wet pendulum: SRV 32 / P3; Wet ramp: R10 |
| Acoustic rating | FIIC5,6 = 58; L'nTw3 = 47; AAAC 4 Star Rating |
| Dent resistance | Residual indentation ≤ 0.2mm |
| Residential structural warranty | Lifetime Structural Warranty |
| Residential wear warranty | 30 Year Residential Wear Warranty |
| Commercial warranty | 10 Year Commercial Wear Warranty |
Experience ResiPlank Vinyl Ardore 507 At Domain Flooring
Visit our Carnegie showroom to see and touch the ResiPlank Vinyl Ardore 507 range in person, or book a free measure and quote to see samples in your own home.