Timber Floor Sanding in Melbourne
Your existing timber floors may have more life in them than you think. Domain Flooring's professional sanding and polishing service restores scratched, faded, and worn timber floors to their original condition, without the cost and disruption of replacement. We're based in Carnegie and service homes and commercial properties across Melbourne and the Mornington Peninsula.
Melbourne homes are full of timber floors worth saving. Whether it's a Victorian terrace in South Melbourne with 100-year-old boards, an Edwardian home in Hawthorn with floorboards hidden under decades of carpet, or a newer home in Glen Waverley with a surface that's seen better days, the same principle applies: restore first, replace only if you have to.
Domain Flooring is based in Carnegie and has worked with homeowners, renovators, designers, builders, landlords, and commercial clients across Melbourne for years. Our timber floor sanding service handles everything from preparation and repair through to the final coat. Before we start anything, we'll give you an honest assessment of whether sanding is the right answer for your specific floors.
If your boards can be saved, we'll save them. If replacement genuinely makes more sense, we'll say so.
Why Restore Instead of Replace?
Sanding and recoating a timber floor typically costs a fraction of replacement. More importantly, the original boards in older Melbourne homes are often made from old-growth Australian hardwoods, timber that simply isn't available in new flooring products today. Restoring them preserves both the character of your home and the quality of material underfoot.
If your floors are scratched, stained, faded, or dull, sanding almost certainly has more to offer than you'd expect.
Our Refinishing Process
Preparation and Repair
Before any sanding begins, we punch all nail heads below the surface, fill gaps and holes with appropriate fillers, and repair any damaged or loose boards. Getting this right matters because surface preparation determines how well every subsequent step performs. A shortcut here shows up later in the finish.
Rough Sanding
We remove the existing coating, level out deep scratches, and bring the floor back to bare timber. This stage uses heavier grit abrasives and sets the foundation for the finish work that follows. Our equipment is commercial grade, which makes a measurable difference to the evenness of the result compared to domestic sanders.
Fine Sanding
Multiple passes with progressively finer grits smooth the timber grain and prepare the surface for finishing. This stage is where the quality of the final result is largely determined. Rushing it shows in the finish, and we don't rush it.
Staining (Optional)
If you want to change or deepen the colour of your floors, this is the stage to do it. We can apply a custom stain to achieve a range of tones, from light Nordic finishes through to deep, rich Australian hardwood tones. We'll show you samples on your actual floor before committing to any colour.
Coating and Polishing
We apply three coats of premium commercial-grade polyurethane, sanding lightly between each coat. You can choose from matte, satin, or gloss finishes in water or oil base, depending on the look you're after and the level of traffic your floors handle day to day.
Where We Work
Domain Flooring is based in Carnegie, centrally positioned to service customers from Melbourne CBD and inner suburbs all the way to the Mornington Peninsula. Our timber floor sanding team covers ten regions across greater Melbourne: the CBD and Inner City, Inner South and South-East, Glen Eira and Stonnington, Inner Bayside, the Greater South-East, Bayside South, Frankston and surrounds, and the full length of the Mornington Peninsula from Hastings through to Sorrento and Cape Schanck.
Whether you're in Toorak, Brighton, Cheltenham, Glen Waverley, Mordialloc, or Sorrento, we come to you for the free measure and quote at no charge.
View our full list of serviced suburbs
Why Domain Flooring for Timber Floor Sanding
We're honest before we start.
We're honest before we start. Not every floor is worth sanding, and we'll tell you if yours isn't. If replacement makes more sense for your budget or the condition of your boards, we'll say so clearly. We can help you find the right new product if that's the direction you take.
We understand Melbourne's older homes.
Timber floors in Victorian, Edwardian, and mid-century Melbourne homes each come with their own characteristics, from inconsistent board widths and old-growth species that sand differently, to subfloor conditions that affect how boards move across seasons. We know what we're dealing with before we start.
One job, managed start to finish.
From your free measure and quote through to the final coat, our Domain Flooring Preparation and Logistics Centre handles your project as a single managed job. No surprises, no loose handovers.
Commercial-grade equipment and premium materials.
The difference between professional and domestic sanding equipment shows up in the evenness of the cut and the longevity of the finish. We use commercial-grade sanders and premium polyurethane coatings throughout, not consumer equivalents.
Frequently Asked Questions
How long does timber floor sanding take in Melbourne?
Most residential jobs take one to three days depending on the size of the area, the condition of the boards, and the number of coats being applied. We'll give you a specific timeframe during the measure and quote once we've seen the floor in person.
How many times can a timber floor be sanded?
Solid timber floors can typically be sanded multiple times across their life, depending on board thickness. Engineered timber boards can usually be sanded once or twice. We'll assess your specific boards and tell you honestly where they stand before any work begins.
How much does timber floor sanding cost in Melbourne?
Cost depends on the floor area, the condition of the boards, and the finish selected. We provide a written quote after measuring, so you know exactly what you're paying before anything starts. There are no variations on the day.
Can gaps between boards be fixed during sanding?
Yes. Gap filling is part of our standard preparation process. Depending on the size of the gaps and the species of timber, we'll recommend the right filler to give you a consistent, solid surface across the whole floor.
Do I need to move furniture before the job starts?
Yes, the floor area needs to be completely clear before we begin. We'll confirm exactly what preparation is needed on your end when we provide your quote, so you're not left guessing in the days before we arrive.
Ready to Revive Your Timber Floors?
If your timber floors have seen better days, a professional sand and refinish may be all they need. Book a Free Measure and Quote and one of our team will come to you, assess the condition of your boards, and give you an honest recommendation on the best path forward.
Quality Flooring for Every Domain
21 Koornang Road, Carnegie, Victoria 3163
03 9569 2564
sales@domainflooring.com.au
Monday to Friday 10am to 5pm, Saturday 10am to 2pm